LA-610 MkII Classic Tube Recording Channel
クラシックなチューブ・マイクプリアンプと LA-2A- スタイル・コンプレッサー
LA-610 MkII は、Coldplay、Van Halen、Beach Boysなどのアルバムで聴くことができるオールチューブのビンテージ・マイクプリアンプと本物のTeletronix T4オプティカル・コンプレッション回路を一体化したチャンネルストリップです。
LA-610 MkII は、60年代にBill Putnamによって開発された伝説的なコンソール・モジュールiを基に作られています。そのキャラクターとウォームなサウンドはよく知られ、Frank SinatraからColdplay 、Van Halen、Pet Sounds に至るまで数多くのアーティストのレコーディングにこのプリアンプが使用されました。LA-610 MkII は、オリジナル・コンソールのマイクアンプの設計と同様にシルクのようなビンテージの暖かみのあるサウンドをソースに与えます。
LA-610 Mk IIのT4チューブ・コンプレッサーは、オプト・コンプレッサーのキング、Teletronix LA-2Aと同じとても暖かいサウンドのリミッティングを提供します。エレクトロ・オプティカルディテクター、または“T4 セル”は、Teletronix LA-2Aの心臓であり、魂です。そのフォト・レジスターは、重要なサーキットであり、コンプレッサーに独特な暖かみを与え、ボーカル、ベース、アコースティック・ギターのトラッキングに最適です。まとめると、LA-610 MkIIの伝説的なプリアンプとコンプレッサーを使用して悪いサウンドを得ることは不可能です。
“The LA-610 Mk II is my go-to channel strip for vocals. It gives me that warmth I'm looking for, before hitting the DAW. I highly recommend it!”
– Ariel Borujow (Chromeo, Mac Miller, Madonna)
Smooth and warm
Does an outstanding job without breaking the bank. It's all I use on bass now.続きを読む
I have had this for about a year now. At first I was underwhelmed. The pre does not have an over the top 'TUBE' vibe like some preamps do. It just seems to do it's job without complaints....続きを読む
One of the best strips going!
This is my go to channel strip for tracking bass, acoustic or vocals! just makes everything sound amazing! available in software too now so now i can have many instances at once ;)続きを読む
I love this bad boy. my go to for vocals, i'm a baritenor and its luscious in the low with the highs right where i need them. or just plug and play my guitar or bass with an optical...続きを読む
I'm a luck star, i have two LA-610 MKII, they are my best device, Thanks, UA!!!続きを読む
English : Hello, here is my review of the La-610 MkII channel strip. I am not going to tell the features again, the product page does it quite well. I use it in a home studio to record...続きを読む
True Bypass of the Compressor Circuit
Larger and Better Lit Metering
Improved Output Signal Performance
Auto-Sensing Universal Power Supply
Improved stability with feedback-style shelving EQ
Improved consistency with Input Gain values
LED Jewel Light Never Needs Replacing
Mic, Line and Hi-Z Input, Line Output
Dual Impedance Mic and Hi-Z inputs (Mic: 2K, 500Ω, Hi-Z: 2.2M, 47KΩ)
5 position Stepped Preamp Input Gain, Continuous Preamp Output Level
-15dB Pad Switch (15dB Pad/Off)
Phase reverse (0/180º)
48 volt Phantom Power switch (+48v/Off)
+/- 9 dB stepped High Shelving Filter (4.5, 7, 10 kHz)
+/- 9 dB stepped Low Shelving Filter (70, 100, 200 Hz)
T4 Optical Compressor with Continuous Peak Reduction and Makeup Gain
Compress/Limit/Bypass Modes of Dynamic Operation (3:1 / ∞: 1)
Meter Source Selector Switch (Preamp/Gain Reduction/Compressor)
Front Panel Power switch (On/Off)
Custom Altran and Cinemag Transformers
LA-610 MkII Classic Tube Recording Channel
Smooth and warm
Does an outstanding job without breaking the bank. It's all I use on bass now.
I have had this for about a year now.
At first I was underwhelmed. The pre does not have an over the top 'TUBE' vibe like some preamps do. It just seems to do it's job without complaints.
However after using it a while I started to notice that it is actually very very good in an unobtrusive way. I simply can not get this pre to sound harsh or strident, but it does not sound dark either.
Did I mention this is good on bass guitar?
I recorded a Stingray with the hiZ input. Very little tweaking and it was one of the better DI recordings I have ever done.
Perfect amount of bite, sizzle and nice fat low end.
Cons, no highpass filter so you have to use the low EQ for that. It would be nice to be able to boost the mid bass and cut sub lows.
One of the best strips going!
This is my go to channel strip for tracking bass, acoustic or vocals! just makes everything sound amazing! available in software too now so now i can have many instances at once ;)
I love this bad boy. my go to for vocals, i'm a baritenor and its luscious in the low with the highs right where i need them. or just plug and play my guitar or bass with an optical compression, what more do i need... well i do have an apollo so i guess its a UA love affair!!!!
I'm a luck star, i have two LA-610 MKII, they are my best device, Thanks, UA!!!
Hello, here is my review of the La-610 MkII channel strip. I am not going to tell the features again, the product page does it quite well.
I use it in a home studio to record almost anything : Drums, vocals, basses, guitars, pianos.
I already knew the amazing sound of the 610 Mic pre, as I already had a 6176 before I bought the LA-610. The 610 is absolutely sweet and warm (SSL addicts should not stay here). I like to push it with the +10 gain.
The EQ section is simple yet usefull on any source.
Let's talk about the compressor, wich is built on the LA-2A tube leveler.
I use it on snare drums, vocals and clean electric guitars (like rickenbacker's).
The fact is that this comp has an really cool color, but you can't use it on anything. It is used at its best on sources with a Â«Â middlerangeÂ Â» color, like vocals, or even snares.
It doesn't work well on kicks (i use the brightness of the 1176 from the 6176) as it gives to much middlerange, and on any source that doesn't need a boost in middlerange.
This is why I give it 4 stars, and also for the fact that it doesnt have the Â«Â splitÂ Â» function of the 6176, wich means I can't use the comp alone.
Salut, voici mon test du channelstrip LA-610 MKII. Je ne vais pas m'attarder sur les caractÃ©ristiques, rÃ©fÃ©rez-vous Ã la page du produit.
Je m'en sers en home studio pour enregistrer tout type de sources : batterie, voix, guitares, basses et mÃªme un piano droit.
Je connaissais dÃ©jÃ le son du prÃ©ampli 610, puisque je possÃ©dais dÃ©jÃ le 6176 avant d'acheter le LA-610. Le son est trÃ¨s doux et chaud, il arrondit les angles (Fans du son SSL, passez votre chemin).
Il excelle lorsqu'on le pousse dans ses limites avec le gain Ã +10.
L'Ã©galiseur est aussi simple qu'utile sur n'importe quelle source.
Voyons le compresseur Ã lampes, construit Ã partir du classique LA-2A.
Je m'en sers sur la caisse claire, les guitares clean (rickenbacker pour les connaisseurs), et les voix.
Ce compresseur dÃ©livre une chouette couleur, trÃ¨s typÃ©e mÃ©dium chaud, qui ne le rend pas absolument polyvalent. Il est le plus efficace sur les sources chargÃ©es en mÃ©diums, comme les voix ou mÃªme la caisse claire.
Il faut l'Ã©viter sur la grosse caisse (je prÃ©fÃ¨re la brillance du 1176), et plus gÃ©nÃ©ralement sur toute source ou les mÃ©diums ne doivent pas Ãªtre mis en avant.
C'est pour Ã§a que je lui met 4 Ã©toiles, et aussi pour l'absence de la fonction Â«Â splitÂ Â» pourant disponible sur le 6176. j'aimerai bien utiliser le compresseur seul, ou en chaine avec un autre traitement.
This is my review of the LA-610 MkII after a couple weeks of daily use in a commercial recording studio.
I like the flexibility of the gain staging. Picking the input impedance, input gain and preamp level for my source isn't hard - the sweet spot is generally pretty apparent and a blast to dial in.
The LA2 style compression is easy to use - find a spot where it floats nicely on the source without dulling things, or sounding too grabby and you're good to go. The compression is fairly forgiving, so it's great in a situation where you need to "set it and forget it"
The EQ is very useful and musical, even though it's just shelving. +6dB @ 10k is very smooth on pop/r&b vocals, for example. Cutting with the 70hz band instantly removes most "mud" I have inevitably encountered with a darker pre like the 610.
True compressor bypass allows me to accurately compare compression in and compression out. Extremely useful.
Fantastic VU meter with LED light.
The fact that you can not use the preamp and compressor as separate units with independent I/O really bothers me - it was almost a deal breaker to be honest. Sure, i can bypass the LA2 section if i need to patch in faster compression after the strip, but I could be using the now unused LA2 with something else in the mean timel! Or what if I wanted to run a 1176 before the LA2 to grab fast peaks and smooth things out? am trying to look for a mod but am having no luck.
Input clipping isn't always super pleasant. For a long time, my go to mic pre has been a Vintech x73. I love pushing the input gain right to the edge of breaking up, on almost anything, because even when it starts clipping, it often is still very musical and pleasant. The clipping on the input gain of the 610 is, in some cases, less musical than some other preamps I have used.
I use the LA-610 MkII for recording and mixing.
During mixing, the EQ and compression give me a special quality of sound that I can't achieve with most plugins.
For recording , I find the pre amp/EQ/compression works fantastically for vocal recording especially. The high frequency band works well at adding a pleasant "air" to the vocal when this is what I require.
The compressor works very naturally when controlling the dynamics of the singer. I have not yet found an instance when the limiter option has worked well for me.
I ran a comparative test between the instrument input with my Great River ME-1NV, Millennia TD-1 and the LA-610 MkII when preparing to record a bass guitar session. The Great River was very much better in my opinion than both other options. However, the LA-610 MkII performs well when capturing a direct guitar signal when I use an amp simulator in the computer.
I had the LA-610 MkII go faulty mid-session recently whilst recording tabla. The power relay switch stated to flicker on and off. As it turns out there was a problem with the power supply and all the relays in the unit downstream from that flickered on/off.
I was a fair bit disappointed to discover that the LA-610 MkII is made using SMD electrical components and not point to point wiring as the original UA hardware devices had before. This makes getting a repair done very much more complicated.
Fortunately, the local agents in South Africa, Tuerk Music in with the help of Matt Allison have been extremely helpful in identifying the problem and helping me get the unit repaired.
The only issue is that when I bought and payed for the LA-610 MkII and UAD2 solo card combo special, there was a shipment shortage from the supplier to South Africa. My unit arrive more that three months after I paid for it (worth the wait, by the way!) So now, when it came to repair the unit, it appears that I am out of warranty when in fact I am not. I will have to pay for the new power supply myself! If the folks at UAD a reading this, please see if you can rectify this. Paul Martin at Tuerk Music is my main contact for this if you choose to follow up.
In summary, I love using the LA-610 MkII. It will remain with me as a key part of my work as long as I am able to keep working in the exciting world of music recording!
Creative Native Productions
Cape Town, South Africa
Both 610 preamp and LA-2A compressor are evergreen classics, and their sound signature doesn't need more explanations. The combination of the two is something extremely powerful and usable.
One of my main concerns, when I was thinking to buy it, was the absence of independent I/O sections for preamp and compressor (like i.e. the 6176 channel strip). On the LA-610, you can bypass the compressor section, but you can't do the same with the preamp section. So, I was afraid to get a not completely flexible gear as the 6176 is.
When I finally got it in my studio, I started to experiment with it not only as a front-end gear for recording (this was obviously the main purpose I bought it for), but also for tracking previously recorded tracks (using the Line level input and output). There, I discovered the LA-610 can effectively be used as a standalone compressor, when needed, with its own lovely personal sound, when keeping the input preamp gain low enough to give minimum sound coloration.
Furthermore, I'm now used (for vocals especially) to record using very neutral preamps, and retracking afterwards through the LA-610. This way, I have a lot more flexibility, and I can fine-tune the LA-610 to make the tracks to sit perfectly in the mix without any other processing.
Definitely, the LA-610 is a really complete gear, you can use it as a front end pre or pre+compressor, but also as a standalone compressor, and as a "plugin" for tracking.
Really love it.
very nice vintage sound but the only flaw in my opinion is not being able to bypass the preamp
WELL, That DID'NT work
SO.... Don't buy this and expect it to last.... OR Hold its Resale Value....Sent it to the Canadian repair, Very nice guys, replaced almost everything and NOW, 2 months after the repair, i have the SAME output distortion from JUST the compressor when its in line., NOW, i call Canada rep, then say send to USA for get fixed, that's where its from.... NO, end of story for me.... sorry guys, i expect more out of High end gear... I'm kinda disappointing, I could have Bought a Behringer..It may have lasted longer than 1.5 yrs.... Hope others have better, longer , results....
Ok. So I bought it because I got a free UAD-2 Duo card (which I use all the time and love). and its rep and some friends recomendations I figured why not great deal right. I will state here for the record that it sat unopened for months. I just didn't have a call for it. But a jazz vocal session just the thing right?!
Well Im thinking maybe something is amiss. I just finished the vocal session and I actually put this baby back in the box and went with another channel strip. The mics used were Neumann U87i and Neumann Geffel UM57 both tried and true. The LA-610 MKII just sounded midrangey and no low end warmth. I actually took down my UM 57 and put up the U87 because I thought no way it could be this box, no way! I tried everything, switched impedance, made EQ adjustments, limiter in, limiter out, compressor in compressor out, dynamic stage bypassed and even pad in and EQ setting changes but still no dice. Signal was robust and all parameters affected the signal but it just lacked musicality
Well I for one am sadly underwhelmed and will try the box as a DI. But as a channel strip it did not make the cut.
Well maybe my engineering skills just aren't right for this unit. I got it to work ok for some things. I have it boxed up to sell. I put it on ebay for 1000 and no takers. I'll try it again for 900, which seems low since I paid 1600, but then I did get the card with it, which is doing me pretty good. I found a used Avalon that is working so much better for me as a main preamp than the 610mk2. I've had a few people tell me that the 2-610 is a better thing to have, and maybe I'll get one of those eventually. But right now I'm curious about 'iron' so I think my next one will be a neve so I can see what that's all about.
Integral and Versatile
Ive used the LA-610 MK II for over a year now as a channel strip for recording acoustic guitar and micing and recording amps...I can't imagine recording guitar without it.
Even without using the EQ its invaluable for controlling mic gain and adding compression at source.
I also use it as part of a live guitar rig, running the speaker out of low wattage vintage amps into various reactive load resistor boxes converting to line level into the LA-610 's line input and finally out to a valve power amp powering a 2x12 cab.....being able to add EQ & Compression really contributes to the dynamics of the amp in use.
As I said....Verstaile and Integral !
Warm and intense sound
A really cool preamp
Warm & Easy
Surely there can't be a nicer sounding and easier to use preamp than this? Just plug your mic in and instantly you a have a round warm sound in which all the nasty' just seem to be smoothed out without eq. If you do need eq then it couldn't be much easier but it just seems to work seamlessly, again the compressor couldn't be easier with just a more or less type function which couldn't make the engineers job any more simple in getting a great sound reminiscent of tape where just by putting the source through this channel it magically makes everything sound better. No wonder these are so popular, they allow the engineer to just use his/her ears in a musical way without having to think too much about the technical process. You can't have too many of these channels. The compressor is just like a big cushion gently smoothing out and rounding out the sound without the need to de-ess or think too hard. Awesome!
Mannnn!!! The texture!!!
So when I first got my unit July 2017 I hated it. Wanted to instantly return it.
I stuck through it for maybe 2 weeks and instantly fell in love. I love the texture the unit provides. The compression is a lil touchy. I'm realizing keeping it to a minimum is the best route until I'm to a point where I need something to just really be snatched. But so far I love it.
Great Channel Strip. Take a little while to get used to the sweet spot, but when you do, its a great tool! Love the EQ!